FAQ

Products and custom work

I want standard parts — where do I start?

The catalogue is arranged by shape: round tube, box section, sheet, L profile, C channel, I beam. Each page carries the size table, weight per metre, second moments in both axes, and the tolerance bands. A size that is not in the table is made to drawing.

I have only a drawing, or only an idea — how do we start?

Take the custom route. STEP, IGES, DWG and DXF are all read, PDF drawings are fine, and a dimensioned hand sketch is accepted — we produce the drawing. Where information is missing we list what we need, so you are not expected to supply everything at once.

I need a finished part — how does that work?

Finished parts are quoted per project. Where it matches a line we already make, we use the existing tool — colour, surface finish and your branding, with no new tool. Where it does not match, we start with the tooling and a first article. Fabric and metal parts inside a finished assembly are not made here; they are bought in. Composite parts we make ourselves, and the assembly ships complete.

One order with both standard parts and machined parts — one quotation?

Yes. Priced separately, and each shipped to its own lead time.

What a quotation needs

What is the minimum information for a quotation?

Part size, quantity, length and service conditions. Service conditions means what load it carries, what environment it sits in and what medium it touches. A drawing is best; without one, those answers are enough to quote.

Which drawing formats do you accept?

STEP, IGES, DWG and DXF are all read, PDF drawings are fine, and a dimensioned hand sketch is fine.

Can you quote without a drawing?

Yes. Describe the critical dimensions and the use, and we quote a range first; the firm figure follows once the dimensions are confirmed.

Who sets the tolerance?

We have standard bands, on each product page's tolerance table. Where a standard band is not enough, it is set on the drawing — send drawing and tolerance together.

The details are not settled — can I ask first?

Yes. Describe the use and the approximate size, mark what is not settled, and we give the next step on what is available. You are not asked to complete the specification first.

MOQ and tooling

What is the MOQ for standard parts?

500 pcs for tube, rod and profiles; 200 sheets for sheet.

What is the MOQ for custom parts?

Per project. Whether a tool is needed, and which tool, changes the MOQ for the same part.

Do you cut the tool yourself, or is it subcontracted?

We do not cut tools; we quote through external toolmakers. The tool is paid for by the customer and owned by the customer, and it can move with them to another supplier.

Are there existing tools for finished parts?

The finished-part lines that are running have tools, and a colour or surface change does not need a new one. Which models, ask by product family.

How do samples work?

Samples of standard parts are free. For a custom part we make a sample once the tooling is paid for, then the first production run after the sample is approved. Volume production after the first run is approved.

Lead time and capacity

How is lead time calculated?

Normal batches ship in 15–20 days. Large volumes are quoted against the schedule the volume needs, and a new tool adds 5–7 days, dated separately from production. Transport time depends on the mode.

What capacity do you have?

Across all products, more than 600,000 pieces shipped last year, and capacity is not full.

On a small quantity, where does the cost go?

A small batch uses a simple tool, and that tool is what raises the unit cost.

What if the drawing changes after sign-off?

If the tool can be modified, we modify it; if it has to be remade, it is remade. Before sign-off we sample with a simple tool and a hand-laid trial part, so the shape and the fit can be seen first.

Packing and transport

How is it packed?

Cartons, crates and pallets all work, depending on the product and on the transport.

Which Incoterms do you work to?

EXW, FOB and CIF are all available.

Who issues the export documents?

We do.

Payment

What payment methods do you accept?

For a first order, T/T only.

Can we have credit terms?

Not on a first order: 50% deposit on confirmation, the balance before dispatch. Once we have shipped a few orders together, terms can be discussed.

How soon can I have a quotation?

We answer within 24 hours on whether it can be made and what is missing. A simple part is quoted within 3 working days. Where a tool, design or strength checking is involved, it runs with the project, and we tell you the date rather than a guess.

How long is a quotation valid?

30 days.

Compliance and documents

Who does the CE marking?

CE is completed by the machine builder under the applicable directives; we supply the technical file and the material data it needs.

What flame-retardant performance can you reach?

UL94 V-0, V-1 and V-2 are made to a flame-retardant formulation, and the report is issued by a third party per batch. A non-flame-retardant grade is also available.

Do you have RoHS and REACH declarations?

Yes. RoHS and REACH (SVHC) declarations are provided on request.

Who tests mechanical, chemical and environmental performance?

An external laboratory, with a formal report. Production parameters are recorded per part and archived by batch, so the record is traceable.

What warranty do you offer?

Set by project and by cost, up to 20 years.

If I send a drawing, where does it go?

Drawings and project information are used for quotation and production only, and go no further. An NDA can be signed before you send anything.

Is the design done in house?

Yes. The team includes people who have worked at Airbus and Vestas, and the core team averages twenty years of design and manufacturing experience.

What is supplied at delivery?

Packing list, material certificate, test report and first-article report.

What we do not do

Do you machine customer-supplied material?

Not finished-part machining on customer material, and post-machining is done on our own production only. Where you supply the fibre or the prepreg yourself, we do process your material into product.

Can I buy the material and do the machining myself?

Yes. Full lengths, cut lengths or drilled parts are supplied to drawing, and the machining is yours.

Can you make sizes outside the table?

Yes, to drawing. Where a new tool is needed, that is quoted separately.

Send the drawing. We will send the route.

A drawing, a photo of a failed part, or three lines of requirement is enough to start. Scope, price indication and lead time within 24 hours.

No commitment · NDA available · Reply within 24 hours

Request a quote WhatsApp