Pultruded carbon fibre rod
RodsCarbon fibre
Diameter Ø0.25–100 mm (Ø60 and above made to drawing)
Pultrusion
RodsCarbon fibre
Diameter Ø0.25–100 mm (Ø60 and above made to drawing)
Pultrusion
Made to drawing
Send the drawing or the duty — we will say whether it can be made, and how.
Talk to us
A pultruded rod carries every fibre straight down its length, so all of them work when it bends — that is why it is the stiffest thing you can buy per kilo in bending. Torsion is another matter: it is carried by the resin, so a rod is poor in twist. Where a part must resist torsion, use a wound tube instead. Under compression, watch the length-to-diameter ratio: a long rod buckles before it crushes.
Cutting to length, thread turning, grinding, drilling and end fittings are all done in house. Diameter holds ±0.05–0.15 mm, and ±0.05 mm where it is ground for a fit. Give the thread specification with the enquiry and the profile and length come back confirmed with the quote.
Diameter, length, quantity and which way it is loaded — bending or compression. Add the thread specification where there is one. With those, price and lead time come back in one reply; with diameter alone, only a range is possible.
A drawing, a photo of a failed part, or three lines of requirement is enough to start. Scope, price indication and lead time within 24 hours.
No commitment · NDA available · Reply within 24 hours