Carbon fibre finished parts: OEM, ODM and private label

HP-RTM or compression moulding: what drives tooling spend and piece price

  • Target price and annual volume where the price has to sit decides which processes, and which mould types, are even open.
  • Shape and load path closed shell, ribs, moulded-in inserts, or constant section: each one points at a different line.
  • Surface class Class A and "looks like carbon fibre" are two different cost structures.
  • Delivery date tooling and sampling sit at the front of the queue, volume behind them.

Settle those four and the line, the mould type and the batch rhythm follow. Leave them open and there is no price worth discussing. The custom-parts page is about industrial parts made to drawing; this page is about the part that carries your brand into your channel. Same plant, two delivery logics.

What the line makes Tooling Piece price Economic batch Appearance faces
HP-RTM: closed shells, moulded-in inserts High (steel mould + high-pressure injection) Low; fastest cycle 3–5 minutes a shot Medium to high volume Both faces are mould faces; Class A achievable
Compression moulding: ribbed and bossed semi-structural parts (wet or prepreg feed) Medium (wet) to medium-high (prepreg) Wet: cheap mould, labour-heavy. Prepreg: costly material plus lay-up hours Medium (wet) to low-to-medium (prepreg) Mould face to Class A; the other face is bag side
Filament winding: bodies of revolution, closed sections Low (mandrel) Low Medium volume Mandrel face or machined face
Pultrusion: constant-section parts, the profile as blank Medium (die) Low; priced by the metre By the metre or by the length As pultruded
LFT-D: high-volume, highly integrated thermoplastic functional parts Medium-high (steel mould, no injection unit and no preforming step, so below HP-RTM) Low; compounded and moulded inline High volume Mould face

Pultrusion and winding turn out constant-section profiles and bodies of revolution; the profile as a product belongs on the stock page. This table compares routes for a finished part.

LFT-D is the cheap, fast route, and it lays down long fibre, not continuous fibre. Thin walls and long flow paths fall outside it, and a load case that needs continuous fibre still goes to HP-RTM or compression moulding.

Where carbon parts get reworked

Draft angle. The shape gets fixed, no draft is allowed for, and the problem appears when the mould is already cut. Changing it on the drawing is cheaper than changing it in steel.

Surface class. The drawing says Class A, the process was chosen to make the difference up in finishing, and the cost lands on the piece price. Class A is not an adjective; it is measurable. Orange peel, DOI, 60° gloss, read under D65 — and settled before the mould is cut.

Volume and mould. Overestimate the volume and a steel mould never amortises. Underestimate it and a soft mould will not last to volume.

Packaging and labels. Left until the week before shipment, and then the container booking or the block-train slot is gone.

We put these on the table at the review stage. On a tracked-robot top cover, the specification never said people would stand on it; the 120 kg standing load came up in review. The boom-lift arm went the other way: the strength check had left out the arm's own weight, a colleague caught it in review, the mould had not been cut, and only the drawing changed.

Private label and white label: mould, drawing, colour master

  • Tool ownership. The customer pays for the mould in most cases; at volume we can carry part of it. Whoever pays, owns it.
  • Drawing flow. Your drawing is used for your part only. It is not reused across customers, and an NDA can be signed.
  • What you supply. Brand authorisation, label specification, barcode, the regulatory list for the destination country. Packaging and marking follow your specification; packaging design comes from us.
  • How colour is judged. Colour difference runs to the standard you give, against a signed master. On carbon parts the variation comes from the resin system and the clearcoat, not from pigment — and those are the same two places where batch-to-batch drift shows up first.

Design ownership in one line: OEM, we build to your drawing; ODM, we design. The brand is yours, the part is ours. Private label, white label, own brand — the same job.

Export compliance and documents: PPE, MDR and GPSR go three different ways

Helmets and protective gear are PPE under EU 2016/425 and need Notified Body type examination. Wheelchairs and prosthetic sockets are medical devices under MDR 2017/745. Phone cases, luggage and pool cues are general consumer products, so GPSR applies. Since 13 December 2024 the label has to carry the EU responsible person and the importer's details.

We supply material and process documentation, test samples and batch traceability, and work with you through type examination and the technical file. The DoC is signed by you as the manufacturer; we support it.

What can be checked. Material batch traceability, CMM reports, a retained sample from every batch. A factory audit by you or by a third party.

Export documents are checked and prepared against the destination-country list.

Delivery: rail (China–Europe block train), sea, road

  • Rail China–Europe block train: FCA, CIP, DAP.
  • Sea FOB, CIF; the port is quoted as the actual port of loading.
  • Road quoted to destination.

FCL and LCL both.

What we do not take on

  • A finished part you supply, brought in for secondary machining cutting, drilling, trimming: no. The part did not start as our material, so a fault cannot be traced to our process or to the part itself. We machine our own parts. Parts that arrive already made are not taken on.
  • A price comparison only, with no drawing and no volume there is no firm price to give, and any price given comes back for revision.
  • Us fronting the tooling, with volume promised later tooling follows the rule above: whoever pays, owns it.
  • FBA prep and warehouse fulfilment we make and we deliver. What happens to the goods after they leave the plant is your logistics.

Three ways to work with us

  • OEM

    Build to your drawing

    You send the drawing; we build to it. Tooling, lay-up, tolerance and inspection all follow the drawing, and our name does not appear on the part. For teams that already have the structure and need capacity.

    You bring: 3D + 2D + acceptance criteria

  • ODM

    You bring the duty, we bring the structure

    You give load, target price, annual volume and where it is used. We return the structure, the process route and the tooling. The design is yours and so is the brand. For teams with a channel and no structural team.

    You bring: duty + target price + annual volume

  • Private label

    Our part, your brand

    Pick from shapes we already run, change colour, finish, print and packaging, and ship under your own brand. Lowest volume threshold, fastest to market.

    You bring: selection + brand assets + first order

What we make

Cases

Parts that do not belong in a catalogue

View all case studies

FAQ

What is the minimum order for a finished part?

There is no blanket minimum order; the minimum batch comes out of the review. Standard profiles are separate: from 500 pieces.

How long do tooling and sampling take?

Soft tooling 10–15 days, steel tooling 30–45 days. Sampling runs after the mould and follows the tooling slot.

Who pays for the mould, and who owns it?

The customer in most cases; at volume we can carry part of it. Whoever pays, owns it.

How do you control quality?

What can be checked. Material batch traceability, CMM inspection, a retained sample from every batch. A factory audit by you or by a third party. Third-party testing is quoted per project, with cost and lead time listed separately.

How is colour difference controlled?

To your standard, against a signed master. On carbon parts the variation comes from the resin system and the clearcoat; batch to batch is compared against the master.

How does payment work?

T/T only on the first order: 50% deposit, balance before shipment. No credit terms on the first order.

Request a quote

sales@atomfrp.com WhatsApp +853 68617664

What to put in the form: target price band, annual volume, delivery date, surface class.

Send the drawing. We will send the route.

A drawing, a photo of a failed part, or three lines of requirement is enough to start. Scope, price indication and lead time within 24 hours.

No commitment · NDA available · Reply within 24 hours

Request a quote WhatsApp