Boom lift, 29 m, 100 kg lighter
29 m came from counting the boom's own weight first, no extra material was needed.
Read the case
Carbon and glass fibre sections, and parts made to your drawingStandard: rod · tube · sheet · profile | Engineering: material selection, structural design, strength verification, batch delivery
Former Airbus and Vestas engineers in-house, core R&D and manufacturing team averaging 20 years in composites
Not only these industries. The constraints in engineering design rarely fall outside this list:
weight · insufficient strength or stiffness · fatigue and vibration · sealing · environment
insulation and RF transparency · cost · part count · batch consistency · design capability
If a part is stuck on any one of them, send it and we will say what it takes.

Fast, light, accurate, stiff.
These four usually trade off against each other; the lay-up makes them coexist on one structure. Sealing comes with the forming step, so the part takes harsh service conditions.
Explore →
Losing weight and keeping surface quality are not a trade-off: local reinforcement where it matters, outer surface formed in one shot, fewer parts and a shorter assembly chain with them.
Explore →Handheld units must stay light enough for hours of use; mobile ones light enough to run longer per charge.
Thin walls, impact resistance and everyday knocks are held on one wall thickness, not bought with extra thickness.
Explore →
Sports loads are repeated and instantaneous: light, energy-returning, and still true after tens of thousands of cycles.
All three are set by one rebound curve.
Explore →
Not separate product lines — the difference is on the drawing: stock, a finished part, or a part to be built to your drawing.
Tubes · plates · rods · profiles
Carbon or glass fibre, chosen per part. 500 pcs minimum (200 sheets for plate), smaller batches and prototypes on enquiry.
See the standard sections
Trekking poles · cues · tarp poles · tables · wheelchairs
Our own profiles made into finished components — use them as they are, or under your own brand.
See the finished parts
OEM build-to-print · ODM application-specific design
Temperature, media, load spectrum, service life — conditions first, materials after.
Request a quoteEach project addresses one or more engineering constraints.
What follows is part of the line. The whole plant can be seen on a visit, or over a video call — write to sales@atomfrp.com.
Lead time for each step depends on part geometry, tooling and order volume. We quote a firm delivery date with the price rather than a blanket lead time.
Please contact our sales engineer with a drawing or a short requirement brief, along with the order volume and target lead time. If confidentiality is required, please sign an NDA first.
The design review comes first, followed by the process review: tolerance stack-up, tooling approach, and quotation are finalized together.
Once tooling is confirmed, samples are made and revised based on customer feedback. Mass production begins only after the trial parts are approved.
Mass production and inspection, with an inspection report issued with each shipment. Export documents prepared according to destination-country requirements; sea, road, or rail freight, with customs clearance and delivery as agreed under the applicable Incoterms.
Send a drawing, a sketch or a working condition. An answer within 24 hours: whether it can be made, what is missing, and the next step.
The map is provided by Google. Loading it sends your IP address to Google and sets their cookies.
Open in Google Maps →