Home Products Carbon fibre rod

Carbon fibre rod

Solid rod: carbon fibre Ø0.25–100 mm, glass fibre Ø3–150 mm. All fibre axial, so it bends hardest and does not collapse under load; cut, drilled, threaded and bonded, ground to ±0.05 mm.

All fibre along the axis: best in bending, weakest in torsion

A pultruded rod carries every fibre straight down its length, so all of them work when it bends — that is why it is the stiffest thing you can buy per kilo in bending. Torsion is another matter: it is carried by the resin, so a rod is poor in twist. Where a part must resist torsion, use a wound tube instead. Under compression, watch the length-to-diameter ratio: a long rod buckles before it crushes.

How it arrives

Cutting to length, thread turning, grinding, drilling and end fittings are all done in house. Diameter holds ±0.05–0.15 mm, and ±0.05 mm where it is ground for a fit. Give the thread specification with the enquiry and the profile and length come back confirmed with the quote.

What a quotation needs

Diameter, length, quantity and which way it is loaded — bending or compression. Add the thread specification where there is one. With those, price and lead time come back in one reply; with diameter alone, only a range is possible.

Send the drawing. We will send the route.

A drawing, a photo of a failed part, or three lines of requirement is enough to start. Scope, price indication and lead time within 24 hours.

No commitment · NDA available · Reply within 24 hours

Request a quote WhatsApp